October 14-18,2024 – Registration opening soon!​
Embassy Suites San Francisco Airport
 South San Francisco, California 

Important Logistics:

• The primary goal of this event is to assist in the development of the PCIe 6.0 Compliance Program. Testing will focus primarily on the electrical tests at (Tx, Rx and LEQ) 64 GT/s only. Link Transaction, Configuration Space and interop tests are available but these will be limited in test coverage. 

• Please note all registrations will be initially placed on a wait list until our technical team has had a chance to review each registration. Please ensure you provide a valid email address so that we can confirm or follow up with any questions.

To participate, your Device must: 

• Your product must support PCIe 6.0 (64GT/s) in order to attend this event. Please note that products tested during this event will not be eligible for the Integrators List. 
• ​Implement full link and transaction layer support at 64 GT/s 
• Be capable of PCIe 6.0 protocol 
• Be able to generate all presets Q0-Q10 and other auxiliary compliance test signals (such as the 52 UI compliance jitter and toggle pattern) 
  • There is a strong preference to devices that respond to the Tx Compliance toggle signal on Rx lane 0 from the CBB and CLB​, device must follow the toggle sequence defined in the base specification 
• Support Loopback and be able to enter loopback via recovery 
• Strong preference Implement a fully functional LTSSM 
• Additional requirements may be announced  
• Any DUT that isn’t able to meet the above requirements will be a lower priority device for correlation tests and undergo reduced testing   
• Each registration may have an additional two attendees accompany the product, up to a maximum of three onsite personnel. NO onsite registrations will be allowed during the event.  

The PCI-SIG is conducting correlation measurements during this workshop. To facilitate this correlation work we ask that you present the same physical copy for all electrical test and please refrain from making updates to your devices between electrical tests. Since this correlation work will take a major amount of time during this workshop we ask that you bring at least two copies of the same DUT. There will be some cases DUT’s are scheduled to test in different test suites at the same time. Your help in providing two copies to complete this correlation effort is appreciated.  

Please be advised that for this workshop we will try and honor your admittance to this workshop on the usual first come first served basis. With the correlation efforts going on at this workshop, we may change this policy based on the distribution of Add-In Cards and Systems being registered.  

Hotel booking Link: Booking Link Coming Soon 

Shipping Instructions: Please ensure your shipment does not arrive at the hotel prior to October 11, 2024. More information regarding shipping will be available soon. 

REGISTER EARLY: In case registration exceeds our testing capacities, we have established a reasonable cap for each product type and revision. If these caps are reached during online registration, we will put any additional products on a waiting list. Products will be moved from the waiting list to full registration if possible, based on the order of their attempted pre-registration and will be notified the week after the registration deadline of Thursday, September 19, 2024. 

COST: Participation in this Members Only event is free. A no-show fee of $250 will be required if your product does not attend the event or your product registration is not canceled by 5:00 pm PT on Thursday, September 19, 2024. 

Notes for Review: 

• Please review the Terms of Participation prior to shipping your product to the event. These Terms of Participation will govern Your activities during the Test Event, including Your obligations to keep certain information confidential. For additional information or questions about this event, or if you are interested in Sponsor Opportunities, please send us an email at compliance@pcisig.com. 

• Switches/Bridges and Retimer Products require registrations as both an Add-In Card and System.  

• ​After testing has begun you are unable to change product registration details 

• Failure to collect schedules during the schedule distribution without prior communication to PCI-SIG may result in cancelation of all time slots